Task Settings - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
Play or Stop Trace
Ø
Select the trace and click
Modify the Trace Name
Ø
On the left panel, enter new trace name and click
Delete the Trace
Ø
Click to delete the trace. Or put the cursor on the trace name (right panel) and then
will appear on the right corner of the trace name; click to delete this trace.

6.6 Task Settings

Click StartàSettingsàCameraàPTZàTask to go to the interface as shown below.
to play the trace; click
57
to stop the trace.
to modify and save the trace name.