License Plate Recognition; License Plate Detection Settings - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
l Configure the schedule
l Set the text prompt and voice prompt. The text will show on the captured picture and the
voice will be broadcasted when detecting a stranger.
l Trigger record, snapshot, alarm-out, buzzer, push, pop-up video, E-mail and pop-up
message box as needed. The alarm linkage settings are similar to the face detection alarm
(See 9.1.1 Face Detection Settings for details).
l Click "Apply" to save the settings.
④ Click "+" to add more successful recognition tasks. Select the added task and then click "–"
to delete it.

9.2 License Plate Recognition

Please add the LPR camera before you using this function. If your camera doesn't support this
function, please skip the following instruction.
Please set plate recognition function according to the following procedures for the first time.
Enable and set plate detection à Add plate group à Add plates to the plate group à
Enable license plate recognition à Set successful recognition (or strange plate) alarm linkage

9.2.1 License Plate Detection Settings

Click StartàAI/EventàAI EventàLPR to go to the following interface. Select an LPR camera
and click the "Detection" tab as shown below.
Set the plate size by defining the maximum value and the minimum value (The default size range
of a single plate occupies from 5% to 50% of the entire image).
Display range: if enabled, the set maximum detection box and the minimum detection box can
be displayed on the left window.
Please select the entrance and exit according to the actual scene.
93