Device Software Upgrade - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
Note: Resetting to the factory default settings will not change time zone.

13.4 Device Software Upgrade

Upgrade
l
You can click StartàSettingsàSystemàInformationàBasic to view MCU, kernel version and
firmware version and so on. Before upgrade, please get the upgrade file from your dealer.
The upgrade steps are as follows:
① Copy the upgrade software (.tar) into the USB storage device.
② Insert the USB storage device into the USB interface of the NVR.
③ Click StartàSettingsàSystemàMaintenanceàUpgrade to go to "Upgrade" interface.
Select the USB device in "Device Name" option and go to the path where the upgrade software
exists. Select the upgrade software and then click "Upgrade". The system may automatically
restart during upgrading. Please wait and do not power off the NVR during upgrading.
Note: The file system of the USB mobile device which is used for upgrading, backing up and restoring
should be FAT32 format.
Flash Upgrade
l
The upgrade steps are as follows:
① Copy the flash upgrade files into the USB storage device.
② Insert the USB storage device into the USB interface of the DVR.
③ Restart the DVR. Then the system will automatically upgrade.
Cloud Upgrade
l
① Click StartàSettingsàSystemàMaintenanceàCloud Upgrade to go to "Cloud Upgrade"
interface.
② Enable "Auto-check for updates" to check if the current version is the latest one
automatically. You can also click "Check for updates" to check the version by yourself. If it is
not the latest one, obtain the latest version from the cloud server and then click "Upgrade". The
system may automatically restart during upgrading. Please wait and do not power off the device
during upgrading.
156