Trace Settings - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
Add Cruise Group
Ø
Click "Add Cruise" to add the cruise, or click
to add the cruise. After that, click "Play" on the left panel as shown to play the cruise
lines in sequence.
Delete Cruise
Ø
In the cruise list, click

6.5 Trace Settings

Click StartàSettingsàCameraàPTZàTrace to go to the interface as shown below.
Trace Record
Ø
Select the PTZ camera and then click "Add" or extend the IPC information by clicking
and then click
speed dome to change its position and set its trace. Then click "Stop Record" to complete the
trace record.
to delete the cruise.
to add a trace name. After that, click "Start Record" and move the
56
to extend the cruise list and then click