Fisheye Settings; Image Adjustment - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs

5.4.4 Fisheye Settings

Some models may not support this function.
Click StartàSettingsàCameraàImageàFisheye Settings to go to the interface as shown below.
Select the camera and the mode of fisheye and installation.

5.4.5 Image Adjustment

Go to live preview interface and then click
to go to the image adjustment interface.
Image Adjustment
Ø
Select the camera and then click "Image Adjustment" to go to image adjustment tab. Refer to the
above picture. Drag the slider to set the camera's brightness, contrast, saturation and hue value.
Check sharpen, wide dynamic and denoise and then drag the slider to set the value. Click
"Default" to set these parameters to default values. The introductions of these parameters are as
follows:
button on the tool bar under the camera window
46