Motion Alarm Handling Configuration - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
② Select the camera, enable the motion, and set the sensitivity and duration of the camera.
Sensitivity: The higher the value is, the more sensitive it is to motion. You should adjust the value
according to the practical conditions since the sensitivity is influenced by color and time (day or
night).
Duration: Refers to the interval time between the adjacent motion detections. For instance, if the
duration time is set to 10 seconds, once the system detects motion, it will go to alarm and would
not detect any other motion (specific to camera) for 10 seconds. If there is another motion
detected during this period, it will be considered as continuous movement; otherwise it will be
considered as a single motion.
③ Drag the camera image to set the motion area. You can set more than one motion area. Click
"All" to set the whole camera image as the motion area. Click "Reverse" to swap the motion area
and the non-motion area. Click "Clear" to clear all the motion areas.
④ Click "Apply" to save the settings. Click "Processing Mode" to go to the alarm handling
configuration interface of the motion alarm.

11.2.2 Motion Alarm Handling Configuration

① Click StartàSettingsàAlarmàMotion Alarm to go to the following interface.
126