VITEK Industrial Video Products – Transcendent Series NVRs
10.1 Target Detection View
Only some models support target detection view. If your device does not support it, please skip
the following instructions.
10.1.1 Human Body/Vehicle Detection View
Only when the camera supports human body/vehicle detection, can you view the real-time
captured people or vehicle pictures. The setting steps are as follow:
① Enable the Tripwire/Intrusion function of IPCs/NVR, draw the line or area and choose the
detection target (see 9.3 Tripwire and 9.4 Intrusion Detection for details).
② Go to live view interface and then click
channel. In this interface, you can switch the channel on the top right. You can also click
the top right corner of the live view interface and then choose the target detection tab to go to the
target detection interface of multi-channel as shown below. Click the captured picture on the
right of the live interface to see the snapshot detailed information, such as snapshot time, camera,
event type and target type.
Click "More" to bring up a dropdown list. You can export the captured pictures by clicking
"Export" or view the target ID by clicking "Information". Click "Search" to go to smart human
body/vehicle search interface. The system will automatically search captured people/vehicles.
Click "Playback" to go to the playback interface.
10.1.2 Face Detection/Match View
Only the face recognition NVR supports the following functions. If your NVR does not support
10 Intelligent Analytics
to go to the target detection interface of this
104
on