Remote Preview - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
password and then set a new password in the popup window. Click "OK" to save the new
password.
Local Settings: click to change the local settings. Set the snapshot number and click "Browse"
to set the snapshot path and record path as shown below. Click "Apply" to save the settings.

14.4.1 Remote Preview

Click "Live Display" in the remote interface to go to the preview interface. The preview interface
consists of the four areas marked in the following picture.
Start Preview
Ø
Select a window in the preview area and then click one online camera on the left panel to preview
the camera in the window. You can click
Left Panel Introduction
Ø
Click on the left panel to hide the panel and click
all the added cameras and groups on the left panel.
View Camera
l
Click to view the cameras. You can view the number of all the added cameras
in the tool bar to preview all the cameras.
to show the panel. You can view
162