E-Mail; Display; Buzzer; Push Message - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs

11.5.2 E-mail

Click StartàSettingsàAI/EventàEvent NotificationàE-mail to go to the e-mail configuration
interface. Set the e-mail address of the recipients. See 13.1.5 E-mail Configuration for details.

11.5.3 Display

Click StartàSettingsàAI/EventàEvent NotificationàDisplay to go to the display
configuration interface. Set the duration time of the pop-up video and the pop-up message box.
If your device support two outputs, please set the output of the pop-up video as needed. After
that, click "Apply" to save the settings.

11.5.4 Buzzer

Click StartàSettingsàAI/EventàEvent NotificationàBuzzer to go to the buzzer configuration
interface. Set the delay time of the buzzer and then click "Apply" to save the setting. You can
click "Test" to test the buzzer.

11.5.5 Push Message

Click StartàSettingsà AI/Event àEvent NotificationàPush Message to go to the interface as
shown below. Check "Enable" and then click "Apply" to save the settings. If Push Server is
online, it will push messages to the mobile clients.
129