Scheme View In Sequence - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
② Double click one camera group on the right side of the interface. The cameras in the group
will start camera group view one by one in the selected camera window.
You can also drag the group directly to any preview window. Right click on the group view
window and then click "Close Dwell" to stop the view.
Click to add camera group. Select a group and click
dwell time; Select a group and click

5.2.4 Scheme View In Sequence

Area ① displays all the dwell schemes; area ② shows the detailed information of the scheme;
Click StartàSettingsàSystemàBasicàOutput Settings to go to the interface as shown below.
area ③ displays all the cameras and groups; area ④ is the tool bar (
button, click it to pop-up a window, enter the display mode name in the window and then click
"OK" to save the current display mode; other buttons are screen mode buttons).
in area ① to create a new scheme. Click
Add Scheme
Ø
Click
to delete it.
Select a scheme in area ① and then click the screen mode button on the tool bar to set the
Configure Scheme
Ø
a)
Select a camera window in area ② and then double click the camera or group in area ③.
screen mode of the scheme.
b)
cannot repeat. You can click the right-click menu "Clear" in area ② to remove a single camera
The camera or group will be added into the selected window. One camera in the same scheme
or click to remove all the cameras.
c) Click "Apply" to save the settings.
to delete the group.
on the top right corner of the scheme
40
to modify the group name and
: clear button; : favorite