Table of Contents
Advertisement
VITEK Industrial Video Products – Transcendent Series NVRs
Operation panel introduction:
Button
PTZ panel introduction:
Button
14.4.2 Remote Playback
Click "Playback" in the remote interface to go to the playback interface.
① Check the recording event types and cameras on the left panel. Set the recording date on the
calendar beside the time scale.
② Click
time scale to play the recording.
The operation of the playback time scale is similar to that of the time scale in the main program
of the NVR. Please refer to 8.2 Playback Interface Introduction for details.
Click to take a snapshot.
Click to start record to computer
Click to start record to the NVR.
Click to zoom in the image of the camera and then drag the mouse on the
camera image to view the hidden area.
Click to zoom out the image of the camera.
Click to start two-way talk.
The 3D zoom in function is designed for P.T.Z. Click it and then drag the
image to zoom in or zoom out the image; click the image on different areas to
view the image of the dome omni-directionally.
Click to close the preview camera.
Click to display original size
Click to enable audio and then drag the slider bar to adjust the volume. You
can listen to the camera audio by enabling audio.
Click
/
to rotate the dome; click
Drag the slider to adjust the rotating speed of dome.
Click
/
Click
/
Click
/
Click to view the preset list and then click the button in the list to call
the preset.
Click to view the cruise list and then click the corresponding buttons in
the list to start or stop the cruise.
to search the recorded data and then click
Meaning
Meaning
/
/
/
to stop rotating the dome.
to zoom in/out camera image.
to increase/ decrease the focal length.
to increase/decrease the iris of the dome.
164
/
/
/
or directly click the
Advertisement
Table of Contents
