VITEK Industrial Video Products – Transcendent Series NVRs
4.1 Add/Edit Camera
4.1.1 Add Camera
The network of the NVR should be set before adding IP camera (see 13.1.1 TCP/IP Configuration
for details).
Refer to the pictures below. Click Add Camera in the setup panel or
of the preview window to pop up the "Add Camera" window as shown below. You can quickly
add or add the IP camera manually.
Quickly Add
Ø
Check the cameras and then click "Add" to add cameras. Click
address, username and password. Click "Default Password" to set the default username and
password of each camera.
4 Camera Management
29
in the top right corner
to edit the camera's IP