VITEK Industrial Video Products – Transcendent Series NVRs
Platform Access
① Set "Access Type" as "Platform Software" and select "Enable" as shown below.
② Check the IP address and port of the transfer media server in the VMS 2.0. The default
server port for auto report is 2009. If it is modified, please go to the transfer media interface to
check.
③ Enable the auto report in the VMS 2.0 when adding a new device. Then self-define device
ID and complete the remaining information of the device in the VMS 2.0.
④ Enter the above-mentioned server address, port, and report ID in the server interface. Then
click "Apply" to save the settings. Now the VMS 2.0 system will automatically connect this
device.
UPnP Report Access
In this interface, you can also access the third-party platform by UPnP Report. If this one is
enabled, please enter the server address, port, and manufacturer ID.
① Click StartàSettingsàNetworkàSNMP to go to the interface for SNMP configuration.
13.1.11 SNMP
152