Storage Mode Configuration - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs

7.4.2 Storage Mode Configuration

Click StartàSettingsàDiskàStorage Mode to go to the interface as shown below.
For example, there are four disk groups. By using disk group, you can correspond the camera to
disk (the record data of the camera in the group will be stored into the disks in the same group).
The NVR with e-SATA interface supports e-SATA recording.
The added disks and cameras will be added into group one automatically. The disks and cameras
in the groups can be deleted except group one (select a disk group and then click
top right corner of the added disk or camera to delete it from the group). The deleted disks and
cameras will be moved into group one automatically.
Each group can add the disks and cameras from other groups. Each disk and camera can only be
added into one group. Select a disk group and then click
pop up a window. Check the disks or cameras in the window and then click "Add".
For the model with 2 or 4 HDD slots, BK group can be added as shown below.
69
in the disk or camera row to
on the