Preset Settings; Cruise Settings - Vitek Transcendent VT-TNR Series User Manual

4, 8, 16, 32, 64, and 128 channel 8 megapixel h.265 real time network video recorders with 4k hdmi output

Table of Contents

VITEK Industrial Video Products – Transcendent Series NVRs

6.2 Preset Settings

Click StartàSettingsàCameraàPTZàPreset to go to the interface as shown below.

Add preset

Select camera and then click "Add" to add preset; or click

side of the interface to display the preset information of the dome and then click

add preset. The operations of the "Add Preset" window are similar to that of the PTZ control

interface; please see 6.1 PTZ Control Interface Introduction for details.

Edit preset

Select camera and preset. You can enter a new name of the preset and then click

the new preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset and

then click "Save Position" to save the preset.

Delete Preset

Select camera and preset and then click "Delete" to delete the preset.

Click StartàSettingsàCameraàPTZàCruise to go to the interface as shown below.

in the camera list on the right

to save

Table of Contents