Cruise Group Settings - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
Add Cruise
Ø
Click in the camera list on the right side of the interface to display the cruise information
of the dome and then click
are similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface Introduction
for details.
Edit Cruise
Ø
Select the camera and cruise in the "Cruise" interface. Enter the new cruise name and then click
to save the cruise name. Click "Add Preset" to add preset to the cruise. Click
the preset. Click
then click
start the cruise and click
Delete Cruise
Ø
Click in the camera list on the right side of the interface to display the cruise information
of the dome and then click

6.4 Cruise Group Settings

Click StartàSettingsàCameraàPTZàCruise Group to go to the interface as shown below.
to delete the preset from the cruise. Click one preset in the preset list and
to move down the preset and click
to stop it.
on the top right corner of the cruise to delete the cruise.
to add cruise. The operations of the "Add Cruise" window
to move up the preset. Click
55
to edit
to