Edit Camera Group; Ip Planning - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs

4.2.2 Edit Camera Group

Click to modify the group information such as group name and dwell time. Click
delete the group. Click

4.2.3 IP Planning

Some models may not support this function.
Click "IP Planning" to go to the interface as shown below. This function supports searching
other NVRs/DVRs that is in the same local network as the local NVR. The user may add the
IPC of other NVRs/DVRs into the unoccupied channels of the local NVR.
Click
NVRs.
Click
address, user name or password by clicking
to add cameras to the group.
to edit the IP address, user name or password and other information of the
behind the "Add" button to add the IPC selected and the user may edit the IP
behind the "Edit" button.
34
to