VITEK Industrial Video Products – Transcendent Series NVRs
③ Click "Apply" to save the settings.
11.4.2 Exception Alarm Settings
① Click StartàSettingsàAI/EventàException Alarm to go to the interface as shown below.
② Enable or disable "Push", "Alarm-out", "Buzzer", "Pop-up Message Box" and "E-mail".
The exception handling settings are similar to that of the sensor alarm (see 11.1 Sensor Alarm
for details).
③ Click "Apply" to save the settings.
11.5 Alarm Event Notification
11.5.1 Alarm-out
① Click StartàSettingsàAl/EventàEvent Notification to go to the following interface.
② Set the delay time and the schedule of each alarm-out. You can click "Edit Schedules" to
edit the schedules (see 7.1.2 Schedule Settings for details).
③ Click "Apply" to save the settings. You can click "Test" to test the alarm output.
128