View Mode; Preview By Display Mode - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
Button
Snapshot
PTZ Control
Zoom In
--
Start/Close Talk
Target detection
-- Camera Info
The single channel Zoom interface is as shown below. Press and drag the blue box to select the
zoom area. Click
to select other cameras for Zooming. Click "Back" to return to the live preview interface.

5.2 View Mode

5.2.1 Preview By Display Mode

Set different screen modes and cameras' display sequences as required and then save the display
modes classified by surveillance areas, priorities etc. Refer to the picture below. Double click
one display mode in the display mode list to view the live images in this mode.
Menu List
Click to pop-up the snapshot window. Click "Save" in the window to
save the image. Click "Export" to export the image.
Click to go to PTZ control interface. See Chapter 6 PTZ for details.
Click to go to single channel Zoom interface.
Click to go to image adjustment interface. Refer to 5.4.5 Image
Adjustment for details.
Click to start talk.
Click to go to single channel target detection interface; the target
includes faces, human bodies and vehicles. (only applicable to some
models)
Click it to view the camera information.
/ to zoom into / out of the image. Click the camera selection box
Meaning
36