Mercedes-Benz SL Roadster 2012 Owner's Manual page 519

Video
516
Subtitles and camera angle
These functions are not available on all DVDs.
The number of subtitle languages and camera
angles available depends on the content of
the DVD. It may also be possible to access the
settings from the DVD menu.
Show the DVD menu (
X
Select DVD-Video DVD-Video
X
cVd the COMAND controller and press W
to confirm.
Select DVD functions DVD functions
X
confirm.
Select Subtitles Subtitles
X
press W to confirm.
In both cases, a menu appears. The # dot in
front of an entry indicates the current set-
ting.
Select a setting by turning cVd the
X
COMAND controller and press W to con-
firm.
Interactive content
DVDs may contain interactive content (e.g. a
video game). In a video game, for example,
you may be able to influence events by select-
ing and triggering actions. The type and num-
ber of actions depend on the DVD.
Select an action by sliding ZVÆ or XVY the
X
COMAND controller and press W to exe-
cute it.
A menu appears and the first entry,
is highlighted.
Press W the COMAND controller.
X
Video AUX operation
Connecting external video sources
External video sources may have different
volumes, which can mean that system mes-
sages such as traffic announcements and
navigation system announcements are much
louder. If necessary, deactivate the system
messages or adjust their volume manually.
page 514).
Y
in the menu by turning
and press W to
or Camera angle Camera angle and
Select, Select
If your vehicle is equipped with the Media
Interface, you can connect an external video
source.
You require an additional audio/video cable
set to connect an external video source to the
Media Interface.
For more details, please contact a Mercedes-
Benz Service Centre or visit http://
www.mercedes-benz.com/connect. Then,
follow the instructions in the "Media Inter-
face" section.
You will find the connection sockets in the
centre console stowage compartment.
Audio/video sockets
Video port (V) (yellow)
:
Audio port (L) (white)
;
Audio port (R) (red)
=
i
For correct playback, a suitable video
standard must be set at the external video
source.
Connect the external device to the corre-
X
sponding port.