Mercedes-Benz SL Roadster 2012 Owner's Manual page 425

Telephone
422
Searching for a mobile phone
To call up the telephone basic menu in
X
COMAND Online: press the % button
one or more times.
To switch to the menu bar: slide V¬ the
X
controller.
To select Connect Connect device
X
troller and press to confirm.
The device list appears.
Select Search for phones Search for
X
You will see the prompt:
connect to to a a Bluetooth connect
SAP phone? SAP phone?
Select SAP SAP telephone telephone.
X
You will see the message:
ing the search, ensure that your ing the search, ensure that your
phone is is switched phone switched on,
activated, the SAP function is activated, the SAP function is
activated and your device is visi‐ activated and your device is visi‐
ble. ble
Select Start Start search
X
The list of retrieved SAP telephones
appears.
You can now authorise and connect the
mobile phone.
Authorising and connecting a mobile
phone
To select the mobile phone that is to be
X
authorised and connected in the COMAND
device list under
MB SAP module MB SAP module: turn and press the con-
troller.
A prompt asking you to enter the 16-digit
PIN appears in the display.
Enter any 16-digit PIN and confirm your
X
entry.
When prompted to do so, enter the same
X
16-digit PIN on the mobile phone within
20 seconds and confirm.
Depending on the mobile phone used, you
X
may have to confirm a module connection
device: turn the con-
phones.
Do Do you you wish wish to to
Bluetooth phone phone or or an an
Before start‐ Before start‐
on, Bluetooth Bluetooth is is
search.
Phones found on the Phones found on the
request on the mobile phone (see the
mobile phone operating instructions).
In COMAND Online, enter the PIN of the
X
SIM card and confirm, if necessary.
i
Follow any prompts on your mobile
phone. If necessary you will be asked to
confirm further profile requests.
Switching between mobile phones
If you have authorised more than one mobile
phone on the module, you can switch
between the individual phones.
To select the required mobile phone in the
X
COMAND device list COMAND device list
found on the MB SAP module found on the MB SAP
press the controller.
The selected mobile phone is searched for
and connected if it is within Bluetooth
range and if Bluetooth
Confirm the module's connection request
X
on the mobile phone (see the operating
instructions for the mobile phone).
In COMAND Online, enter the PIN of the
X
SIM card and confirm, if necessary.
Only one mobile phone can be connected at
any one time. The currently connected mobile
phone is indicated by the # dot in the Blue-
®
tooth phone list.
i
You can only switch to another authorised
mobile phone if you are not currently mak-
ing a call.
Connecting manually
If the connection between the module and the
mobile phone has been terminated, you can
connect to an authorised mobile phone man-
ually.
under Phones Phones
module: turn and
®
®
is activated.