Mercedes-Benz SL Roadster 2012 Owner's Manual page 314

Design Explanation
Day design Day design The display is set perma-
nently to day design.
Night design Night design The display is set perma-
nently to night design.
Automatic Automatic If the
is selected, COMAND
Online evaluates the
readings from the auto-
matic vehicle light sen-
sor and automatically
switches between the
display designs.
Time settings
General notes
If COMAND Online is equipped with a naviga-
tion system and has GPS reception, COMAND
Online automatically sets the time and date.
You can change the time in minute incre-
ments. The date can also be changed.
i If you adjust the time in minute incre-
ments, any time zone settings and settings
for changing between summer and stand-
ard time are lost. Switching between sum-
mer and standard time (
i
The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order to
work properly:
route guidance on routes with time-
R
dependent traffic guidance
calculation of expected time of arrival
R
i
Use this function to set the time for all
displays in the vehicle.
Setting the time/date format
Press the W button.
X
Select Time Time by turning c V d the COMAND
X
controller and press W to confirm.
Automatic Automatic setting
page 311).
Y
Select Format Format and press W to confirm.
X
The # symbols show the current settings.
Set the format by turning c V d the
X
COMAND controller and press W to con-
firm.
Abbreviation Meaning
DD DD . MM MM . YY YY Day . Month . Year
(date format, two digits)
MM MM / DD DD / YYYY YYYY Month/Day/Year
date format, year (all
four digits)
YY YY / MM MM / DD DD Year/Month/Day
date format, year (two
digits)
HH HH : MM MM Hours : Minutes
(24 hrs) (24 hrs)
(24 hour time format)
HH HH : MM MM (AM/PM) (AM/PM) Hours : Minutes
(AM/PM time format)
Adjusting the time zone and switching
to summer time
Press W.
X
Select Time Time by turning c V d the COMAND
X
controller and press W to confirm.
Select Time zone Time zone and press W to confirm.
X
A list of countries or time zones appears.
The # dot indicates the current setting.
Select the country or time zone by turning
X
cVd the COMAND controller and press W
to confirm.
A time zone list may also be displayed,
depending on the country selected.
Select the time zone and press W to con-
X
firm.
The entry for the Automatic time set‐ Automatic time set‐
tings tings is accepted.
Subsequent operation depends on whether
the automatic changeover function to sum-
mer time is available.
System settings
311
Z