Table of Contents
Advertisement
®
if the Bluetooth
function is switched off on
R
the mobile phone while you are using Blue-
®
tooth
interface telephony
if the mobile phone is not logged into a
R
mobile phone network
i
The telephone automatically tries to log
on to a network. If no network is available,
you may not be able to make a 999 or 112
emergency call. If you attempt to make an
outgoing call, the
No No service
appear for a short while.
If you switch COMAND Online off during a call
in hands-free mode, the call will be termina-
ted. You can prevent this as follows:
Switch the mobile phone to private mode
X
before switching off COMAND Online (see
the mobile phone operating instructions).
999 or 112 emergency call
The following conditions must be fulfilled in
order to make a 999 or 112 emergency call:
the mobile phone must be switched on
R
a network must be available
R
a valid and operational SIM card must be
R
inserted in the mobile phone
the PIN must have been entered
R
If you are unable to make an emergency call,
you must arrange rescue measures yourself.
i
The 999 or 112 emergency call number is
a public service. Any misuse is punishable
by law.
Telephony via the Bluetooth
face
Conditions
For telephony via COMAND Online's Blue-
®
tooth
interface, a Bluetooth
mobile phone is required.
service
message will
®
inter-
®
-capable
On COMAND Online
Activate the Bluetooth
X
COMAND Online (
Y
On the mobile phone
Switch on the mobile phone and enter the
X
PIN when prompted to do so (see the
mobile phone operating instructions).
®
Activate Bluetooth
X
®
essary, Bluetooth
phone (see the mobile phone operating
instructions).
The battery of the mobile phone should
always be kept sufficiently charged in order to
prevent malfunctions.
In preparation for telephoning via the Blue-
®
tooth
interface, you should check the fol-
lowing items on your mobile phone (see the
mobile phone operating instructions):
Hands-Free Profile
R
The mobile phone must support Hands-
Free Profile 1.0 or above.
®
Bluetooth
visibility
R
On certain mobile phones, the device itself
must be made "visible" to other devices, as
well as activating the Bluetooth
(see the mobile phone operating instruc-
tions).
This visibility is for restricted periods of
time on some mobile phones.
®
Bluetooth
device name
R
®
Every Bluetooth
device has a Bluetooth
device name. This device name is freely
definable, but can be identical for all devi-
ces from the same manufacturer. It is
therefore recommended that you change
this name so that you can easily recognise
your mobile phone (see the mobile phone
operating instructions).
i
Not all mobile phones available on the
market are equally suitable. Further infor-
mation on suitable mobile phones and
mobile phone brackets can be obtained at
your Mercedes-Benz Service Centre or on
Telephone
®
function in
page 313).
functions and, if nec-
visibility on the mobile
®
function
Z
389
®
Advertisement
Table of Contents
