Mercedes-Benz SL Roadster 2012 Owner's Manual page 323

Vehicle functions
320
Select the seat (
X
Select Backr. sides Backr. sides
X
COMAND controller and press W to con-
firm.
A scale appears.
Turn cVd or slide ZVÆ the COMAND Con-
X
troller and press W to confirm.
To exit the menu: press the % back
X
button.
i
For vehicle model series with a dynamic
multicontour seat: if the driving dynamics
are activated and respond to a change of
direction (e.g. when cornering), the back-
rest side bolsters cannot be temporarily
adjusted.
Adjusting the seat side bolsters
The availability of this function depends on
the type of seat and the vehicle model series.
This function allows you to adjust the air
cushions in the seat side bolsters.
page 319).
Y
by turning cVd the
Select the seat (
X
Y
Select Seat sides Seat sides
X
COMAND controller and press W to con-
firm.
A scale appears.
Slide cVd or turn ZVÆ the COMAND Con-
X
troller and press W to confirm.
To exit the menu: press the % back
X
button.
Balance
The availability of this function depends on
the vehicle model series.
The balance function controls the distribution
of heat on the seat backrest and cushion.
The balance function influences the currently
set heating level of the seat heating; see the
separate vehicle Owner's Manual.
Select the seat (
X
Y
Select Balance Balance by turning cVd the
X
COMAND controller and press W to con-
firm.
A scale appears and shows the current set-
ting. Positive values indicate the heat out-
put for the seat backrest, negative values
indicate the heat output for the seat cush-
ion. The intensity is indicated by an orange
bar in the stylised seat above the scale.
page 319).
by turning cVd the
page 319).