Mercedes-Benz SL Roadster 2012 Owner's Manual page 60

Table of Contents

Advertisement

If the seat belts are not released:
Move the backrest or seat back slightly, but
X
only when the vehicle is stationary.
Seat belt pre-tensioning is reduced and the
locking mechanism is released.
The seat-belt adjustment is an integral part of
®
the PRE-SAFE
convenience function. More
information about seat-belt adjustment can
be found under "Seat-belt adjustment"
(
page 59).
Y
NECK-PRO head restraints
Important safety notes
G
WARNING
Only use head restraint covers which have
been tested and approved by Mercedes-Benz
for your vehicle model.
The use of non-approved head restraint cov-
ers may prevent NECK-PRO head restraints
from triggering properly. Consequently, the
NECK-PRO head restraints cannot provide the
intended level of protection.
Consult a Mercedes-Benz Service Centre
regarding availability.
NECK-PRO head restraints reduce the likeli-
hood of head and chest injuries. The NECK-
PRO head restraints on the driver's and front-
passenger seats are moved forwards and
upwards in the event of a rear-end collision of
a certain severity. This provides better head
support.
If the NECK-PRO head restraints have been
triggered in an accident, reset the NECK-PRO
head restraints on the driver's and front-
passenger seat (
page 57). Otherwise, the
Y
additional protection will not be available in
the event of another rear-end collision. You
can recognise when NECK-PRO head
restraints have been triggered by the fact that
they have moved forwards and can no longer
be adjusted.
Mercedes-Benz recommends that you have
the NECK-PRO head restraints checked at a
Occupant safety
qualified specialist workshop after a rear-end
collision.
Resetting triggered NECK-PRO head
restraints
Tilt the top of the NECK-PRO head restraint
X
cushion forwards in the direction of
arrow :.
Push the NECK-PRO head restraint cushion
X
down in the direction of arrow ; as far as
it will go.
Firmly push the NECK-PRO head restraint
X
cushion back in the direction of arrow =
until the cushion engages.
Repeat this procedure for the second
X
NECK-PRO head restraint.
i
Resetting the NECK-PRO head restraints
requires a lot of strength. If you have diffi-
culty resetting the NECK-PRO head
restraints, have this work carried out at a
qualified specialist workshop.
Seat belts
Important safety notes
G
WARNING
A seat belt which is not worn correctly, or
which has not been engaged in the seat belt
buckle correctly, cannot provide the intended
level of protection. Under certain circumstan-
ces, this could cause severe or even fatal inju-
ries in the event of an accident.
57
Z

Advertisement

Table of Contents
loading

Table of Contents