Table of Contents
Advertisement
Navigation
384
If you select
No, the process will be cancel-
No
led.
Enter the activation code.
X
After entering the activation code cor-
rectly, COMAND Online starts updating the
digital map. Once the update is finished,
you will see a message.
To confirm the message: press W the
X
COMAND controller.
Take the DVD out of the slot.
X
While the update is running, you will see a
message to this effect and a progress bar.
The navigation system is not operational
until the update is complete.
i
You cannot eject the DVD during the
update. If you switch off COMAND Online
during the update, the update is interrup-
ted. It then continues from where it was
interrupted when the system is restarted.
COMAND Online may prompt you to change
the DVD during the update.
Press the V (for DVD changer) or 8
X
(for single DVD drive) load/eject button.
Take the DVD out of the slot.
X
Insert the requested DVD.
X
Once the update has been successfully
completed, you will see a message to this
effect.
To confirm the message: press W the
X
COMAND controller.
Take the DVD out of the slot.
X
The update is complete.
If the update is not successfully completed,
you will see a message that the map update
is not possible.
To confirm the message: press W the
X
COMAND controller.
Take the DVD out of the slot.
X
Advertisement
Table of Contents
