Table of Contents
Advertisement
Example: roundabout
The current speed is maintained:
approximately ten seconds before the
R
roundabout/T-junction and for approx-
imately 1.5 seconds when driving on the
roundabout
approximately twelve seconds before
R
reaching a motorway exit and approx-
imately four seconds after the motorway
exit
Afterwards, the vehicle accelerates back to
the set speed you specified.
Stopping
G
WARNING
When leaving the vehicle, even if it is braked
only by DISTRONIC PLUS, it could roll away if:
there is a malfunction in the system or in
R
the voltage supply.
DISTRONIC PLUS has been deactivated
R
with the cruise control lever, e.g. by a vehi-
cle occupant or from outside the vehicle.
the electrical system in the engine com-
R
partment, the battery or the fuses have
been tampered with.
the battery is disconnected.
R
the accelerator pedal has been depressed,
R
e.g. by a vehicle occupant.
There is a risk of an accident.
If you wish to exit the vehicle, always turn off
DISTRONIC PLUS and secure the vehicle
against rolling away.
Deactivate DISTRONIC PLUS (
If DISTRONIC PLUS detects that the vehicle in
front is stopping, it brakes your vehicle until it
is stationary.
Once your vehicle is stationary, it remains
stationary and you do not need to depress the
brake. After a short period the vehicle is
secured by the electric parking brake, thus
relieving the service brake.
Depending on the specified minimum dis-
tance, your vehicle will come to a standstill at
a sufficient distance behind the vehicle in
front. The specified minimum distance is set
using the control on the cruise control lever.
The electric parking brake secures the vehicle
automatically if DISTRONIC PLUS is activated
and:
the driver's door is open and the driver's
R
seat belt is unfastened
the engine is switched off, unless it is auto-
R
matically switched off by the ECO start/
stop function
a system fault occurs
R
the power supply is not sufficient
R
If a fault occurs, then the transmission may
also be shifted into position P automatically.
Storing the current speed and calling up
the last stored speed
G
If you call up a stored speed and this is dif-
ferent from the current speed, the vehicle
accelerates or brakes. If you do not know
what the stored speed is, the vehicle may
accelerate or brake unexpectedly. There is a
risk of an accident.
Take the traffic conditions into account
before calling up the stored speed. If you do
not know what the stored speed is, store the
desired speed again.
page 192).
Y
Driving systems
WARNING
189
Z
Advertisement
Table of Contents
