Mercedes-Benz SL Roadster 2012 Owner's Manual page 408

Using call lists
Introduction
While the telephone is being used,
COMAND Online stores individual lists for
both incoming and outgoing calls (including
missed calls). Call lists are not available
unless a mobile phone is connected to
COMAND Online.
COMAND Online supports the PBAP Blue-
®
tooth profile. For this reason, note that the
system behaviour differs, especially when tel-
ephoning via the Bluetooth
phone with PBAP Bluetooth
R
The call lists are downloaded automatically
from the mobile phone by COMAND Online
as soon as the mobile phone is connected
to COMAND Online.
®
Bluetooth telephone without PBAP Blue-
R
®
tooth profile:
The call lists are created and displayed by
COMAND Online.
i ®
For Bluetooth telephones without the
®
PBAP Bluetooth profile, the call lists in
COMAND Online are not synchronised with
those on your mobile phone. These calls
may or may not be listed on your mobile
phone, depending on the model.
i
If no mobile phone is connected, then the
Call lists Call lists menu item is greyed out and
cannot be selected. If you connect a mobile
phone other than the previous one to
COMAND Online, the previously available
call lists and their entries will be deleted
automatically. These are still available on
the mobile phone itself.
i
You will only be able to select the respec-
tive menu items once calls have been
received or dialled from COMAND Online.
Displaying missed calls in the COMAND
display is not supported by all mobile
phones.
Opening the call list and selecting an
entry
X
X
®
interface:
®
profile
Example: list of selected phone numbers
:
;
=
X
i
X
X
X
or
X
Press the % function button.
Select Call lists Call lists in the telephone basic
menu by sliding VÆ and turning cVd the
COMAND controller and press W to con-
firm.
A menu appears.
To close the list
Date/time (if available), symbols (if
assigned) and telephone number of the
entry highlighted
To call up options
Select Incoming calls Incoming calls
led led by turning cVd and press W to con-
firm.
The corresponding list appears.
You can also call up the list of dialled calls
by pressing the 6 button when the tele-
phone basic menu is shown. In this case,
the list will only show phone numbers.
Select an entry by turning cVd the
COMAND controller.
To dial a phone number: press W.
To close the list: select the & symbol
and press W to confirm.
Press the % back button.
Telephone
405
or Calls dial‐ Calls dial‐
Z