Mercedes-Benz SL Roadster 2012 Owner's Manual page 469

Table of Contents

Advertisement

Audio
466
Select a station by turning cVd and press
X
W to confirm.
or
Press a number key, such as l.
X
To select the station using the multifunc-
X
tion steering wheel, see the separate vehi-
cle Owner's Manual.
Setting stations by entering the fre-
quency manually
This function is available in radio mode.
Option 1: press the l button.
X
Option 2: select
X
by sliding VÆ and turning cVd the
COMAND controller and press W to con-
firm.
Select
Frequency entry
Frequency entry
X
confirm.
Irrespective of the option chosen, an input
menu will appear.
Enter a frequency using the number keys.
X
COMAND Online sets the frequency
entered.
Waveband
FM (VHF)
MW (medium wave) 531 – 1620 kHz
SW (short wave)
LW (long wave)
i
You can only enter currently permitted
numbers.
i
If you enter a frequency in the MW, SW or
LW wavebands that is outside the fre-
quency range, COMAND Online sets the
next lower frequency.
Radio
Radio
in the radio display
and press W to
Frequency
87.5 – 108.0 MHz
5800 – 6250 kHz
153 – 282 kHz
Storing a station
Storing stations manually
There are 10 presets available for each wave-
band as well as for DAB radio mode.
Quick save: press and hold a number key,
X
e.g. l, until you hear a tone.
The station is stored.
Directly in the station presets: press W
X
the COMAND controller when the display/
selection window is active.
or
Select
Presets
Presets
by sliding VÆ and turning
X
cVd the COMAND controller and press W
to confirm.
In both cases, the station presets appear.
The # dot indicates under which preset
the currently selected station is stored.
Station presets in DAB radio mode
Select a preset by turning cVd the
X
COMAND controller and press and hold W
until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations
with adequate reception under the presets.
The search starts at the lowest frequency.
COMAND Online stores any stations found,
beginning with preset 1. The storing process
ends once the highest frequency has been
reached or once 10 stations have been found.
Any stations stored manually under the pre-
sets will be lost. COMAND Online may not
occupy all memory slots when storing.

Advertisement

Table of Contents
loading

Table of Contents