Mercedes-Benz SL Roadster 2012 Owner's Manual page 399

Telephone
396
®
tooth (SAP profile), you can switch the tel-
ephony mode.
You can change the mode of telephony in the
®
Bluetooth phone list by selecting either a
®
Bluetooth telephone or an SAP telephone.
Call up the phone list (
X
To select the mobile phone with the con-
X
troller: turn and press the controller.
i SAP telephony: mobile phones which are
connected to an optional data-enabled
telephone module with Bluetooth
profile) are shown in the telephone list
under the title
module module. By selecting an SAP telephone,
you change to SAP telephony.
Reception and transmission volume
Once the mobile phone has been authorised,
you can optimise the transmission and recep-
tion volume settings. To find out about the
best possible settings for your mobile phone,
contact a Mercedes-Benz Service Centre or
visit http://www.mercedes-benz.com/
connect.
Press the % function button.
X
Select Connect device Connect device
X
basic menu by sliding V Æ and turning
c V d the COMAND controller and press W
to confirm.
Select an authorised mobile phone from
X
the list by turning cVd.
page 390).
Y
®
(SAP
Telephones of the SAP Telephones of the SAP
in the telephone
Select the list symbol to the right of the
X
entry by sliding VY the COMAND control-
ler and press W to confirm.
Select Reception volume Reception volume
X
sion volume sion volume and press W to confirm.
Select a volume setting by turning cVd the
X
COMAND controller.
To close the setting scale: press W or
X
slide X V Y.
i
Incorrect settings may have an impact on
the quality of calls.
Telephone operation
Incoming calls
Accepting a call
Example: incoming call
To accept: confirm
X
or
Press the 6 button on COMAND Online
X
or on the multifunction steering wheel.
i
You can also accept the call by voice com-
mand using LINGUATRONIC (see the sep-
arate operating instructions).
Once you have accepted the call, you can use
hands-free mode.
The call volume can be adjusted
( page 299).
Y
Other functions during a call (
If the phone number of the caller is transfer-
red, it appears in the display.
or Transmis‐ Transmis‐
Accept Accept by pressing W.
page 398)
Y