Mercedes-Benz SL Roadster 2012 Owner's Manual page 420

The d symbol is replaced by the ¥ sym-
bol.
Importing contacts
Information and requirements
You can import contacts (vCards) from the
memory card and from a USB device into the
address book, or receive vCards via Blue-
®
tooth .
i
Up to 2,500 entries can be imported into
the address book. A message notifies you
when the maximum number is reached.
You then have to delete existing entries in
order to import new entries (
Depending on the source of the contact data,
different requirements apply:
Source Conditions
Memory card The SD memory card is
inserted (
contains importable con-
tact details.
USB device The USB device is inserted
into the USB port
( page 472). It contains
Y
importable contact details.
Requirements for receiving vCards via
®
Bluetooth
You can receive vCards from devices (e.g.
from a PC) that support the sending of vCards
®
via Bluetooth .
It is not necessary to authorise the device in
COMAND to do so.
Please bear the following in mind:
®
Bluetooth must be activated in COMAND
R
and on the Bluetooth
ating instructions for the device.
®
the Bluetooth device must be able to send
R
vCards via Bluetooth
instructions for the device).
®
the Bluetooth device in the vehicle must
R
be switched on.
page 413).
Y
page 472). It
Y
®
device; see the oper-
®
(see the operating
Importing from the memory card or USB
device
Entries imported from the memory card or
from a USB device have the ¯ symbol.
The following conditions must be fulfilled in
order to import vCards:
vCards (vcf files) may be located in the main
R
directory or in folders. COMAND Online
allows you to select the relevant folders
directly.
vCards must have the ".vcf" file extension.
R
i
One vcf file may contain several vCards.
COMAND Online supports vCards in ver-
sions 2.1 and 3.0.
Select Address book Address book
X
or, if the telephone basic menu is shown,
select Telephone Telephone by sliding VÆ and turn-
ing cVd the COMAND controller and press
W to confirm.
Select Import contacts Import contacts
X
confirm.
A menu appears.
Select From the memory card From the memory card
X
USB device USB device in the menu by turning cVd
the COMAND controller and press W to
confirm.
Select Add Add or Overwrite Overwrite
X
confirm.
Add Add imports the entries from the memory
card or USB device into the address book.
Overwrite Overwrite imports the entries from the
memory card or USB device and overwrites
all entries in the address book with the
¯ symbol. The previous entries are then
no longer available.
After the contact data has been imported
successfully, you will see a message to this
effect. The address book or the respective
telephone basic menu is displayed.
i
You can select Overwrite Overwrite
book already contains corresponding
entries. A message notifies you if the
address book is full.
Telephone
in the address book
and press W to
or From From
and press W to
if the address
Z
417