Table of Contents
Advertisement
enter a channel and the desired programme
on this channel.
Step 1: to call up the input line for the
X
channel number: press l during TV
playback.
or
Press W the COMAND controller while in
X
full-screen mode.
The TV menu is shown.
Select
TV TV
by sliding XVY or turning cVd
X
the COMAND controller and press W to
confirm.
Select
Channel entry
Channel entry
X
confirm.
With both options, the input line for the
four-digit channel number appears.
Step 2: to enter a channel/programme
X
number: press the corresponding number
keys.
As soon as you have entered the channel/
programme number, COMAND Online sets
the channel/station.
If you only enter the first two or three digits
of the channel/programme number, the
first receivable programme will be set
within the programme series.
If you have not entered a programme num-
ber, the first programme with adequate
reception will be set.
If you enter channels that are either not inten-
ded for or not allowed in your country, the
Invalid channel number
Invalid channel number
appears.
Press W the COMAND controller and con-
X
firm the message.
i
You can enter channel numbers or pro-
grammes available in your country even if
the reception is currently not adequate.
Information on channel numbers available
in your country can be found on the web-
sites of the private or public broadcasters,
for example.
and press W to
message
Storing TV channels
Storing channels manually
You can manually store up to 40 TV channels
in preset positions.
Option 1: press one or two number keys
X
while a TV programme is playing, until a
tone can be heard.
To save a channel to a single-digit memory
position, briefly press the s number
key, for example.
To save a channel to a double-digit memory
position, briefly press the l number
key, for example. Then within three sec-
onds, press and hold m, for example.
The current channel is stored. The TV pic-
ture then reappears.
or
Option 2: press W the COMAND controller
X
while in full-screen mode.
The TV menu is shown.
Select
Preset
Preset
by sliding XVY or turning
X
cVd the COMAND controller and press W
to confirm.
The channel presets appear. A dot # indi-
cates the currently selected channel.
Turn cVd the COMAND controller to select
X
the desired preset position.
To store a channel, press and hold W the
X
COMAND controller until you hear a tone.
The previously saved channel is overwrit-
ten.
Storing channels automatically
TV channels are automatically stored on the
first 20 of the 40 preset positions in total.
Receivable channels are stored in order of
reception quality. The current preset chan-
nels in positions 1 – 20 are manually over-
written.
Video
505
Z
Advertisement
Table of Contents
