Table of Contents
Advertisement
Operating the climate control system
144
Problems with the "Cooling with air dehumidification" function
Problem
The indicator lamp in
the ¿ button
flashes three times or
goes out. The cooling
with air dehumidifica-
tion system cannot be
switched on.
Setting climate control to automatic
mode
General notes
In automatic mode, the set temperature is
maintained automatically at a constant level.
The system automatically regulates the tem-
perature of the dispensed air, the airflow and
the air distribution.
The automatic mode functions optimally
when the "Cooling with air dehumidification"
function is activated. If desired, cooling with
air dehumidification can be deactivated.
If you deactivate the "Cooling with air-dehu-
midification" function, the air inside the vehi-
cle will not be cooled. The air inside the vehi-
cle will also not be dehumidified. The win-
dows can mist up more quickly. Therefore,
only switch off cooling with air dehumidifica-
tion for a short period.
Activating/switching
Possible causes/consequences and M M Solutions
Cooling with air dehumidification has been deactivated due to a
malfunction.
Visit a qualified specialist workshop.
X
Turn the key to position 2 in the ignition
X
lock (
page 155).
Y
Set the desired temperature.
X
To activate: press the à button.
X
The indicator lamp in the à button lights
up. Automatic air distribution and airflow
are activated.
i
When automatic mode is enabled the air-
flow can be selected (
To switch to manual mode: press the
X
_ button.
or
Press the I or K button.
X
The indicator lamp in the à button goes
out.
Setting the airflow
In automatic mode you can select the follow-
ing airflow settings:
FOCUS
high airflow that is set slightly
cooler
MEDIUM medium airflow, standard setting
DIFFUSE low airflow that is set slightly
warmer and with less of a draught
page 144).
Y
Advertisement
Table of Contents
