Table of Contents
Advertisement
Side windows
102
Touch recessed sensor surface : on the
X
door handle until the side windows are fully
closed.
i
Make sure you only touch recessed sen-
sor surface :.
Make sure that all the side windows are
X
closed.
To interrupt convenience closing:
X
release recessed sensor surface : on the
door handle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
Close all doors.
X
Turn the key to position 1 or 2 in the ignition
X
lock.
Pull the corresponding switch on the door
X
control panel until the side window is com-
pletely closed. (
Hold the switch for an additional second.
X
If the side window opens again slightly:
immediately pull the corresponding switch
X
on the door control panel until the side win-
dow is completely closed (
Hold the switch for an additional second.
X
If the corresponding side window remains
X
closed after the button has been released,
the side window has been reset correctly. If
this is not the case, repeat the steps above
again.
page 100)
Y
page 100).
Y
Advertisement
Table of Contents
