Table of Contents
Advertisement
Menus and submenus
240
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Daytime driving lights
Daytime driving lights
If the
Daytime driving lights
Daytime driving lights
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in orange.
Press the a button to save the setting.
X
Further information on daytime driving lights
(
page 127).
Y
Switching the Intelligent Light System
on/off
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Intell. Light System
Intell. Light System
If the
Intell.
Intell. Light
been switched on, the cone of light and the
L symbol in the multifunction display
are shown in orange.
Press the a button to save the setting.
X
When you activate the
tem
tem, you activate the following functions:
Motorway mode
R
Active light function
R
Cornering light function
R
Extended range foglamps
R
If you set the dipped-beam headlamps for
driving on the right/left, the multifunction
display shows the
system inoperative Inactive for
system inoperative Inactive for
left-side traffic
left-side traffic
System: System
System:
System inoperative
for right-side traffic
for right-side traffic
instead of the
Intell. Light
Intell.
tion in the
Lights
Lights
Settings
Settings
menu.
function.
function
Settings
Settings
menu.
function.
Light System
System
function has
Intell.
Intell. Light
Light Sys‐
Intell. Light
Intell.
Light System:
System:
or
Intell. Light
Intell. Light
inoperative Inactive
Inactive
display message
Light System
System
submenu (
page 240).
Y
Further information on the Intelligent Light
System (
page 131).
Y
Setting the dipped-beam headlamps for
driving on the left/right
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Dipped beams Setting for:
Dipped beams Setting for:
You will see the selected setting:
side traffic
side traffic
Press the a button to save the setting.
X
If you change the setting, conversion does
not take place until the next time the vehi-
cle is stationary.
You can use this function to switch between
symmetrical and asymmetrical dipped beam
(
page 126).
Y
If you set the dipped-beam headlamps for
driving on the right/left, then motorway
mode and the extended range foglamps are
unavailable.
A qualified specialist workshop can set the
dipped-beam headlamps for driving on the
left/right.
Switching the spotlight function on or off
Sys‐
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
Lights
submenu.
Press a to confirm.
X
Press the : or 9 to select the
X
light
light
function.
When the spotlight function is activated,
the assistance graphic shows the pedes-
trian symbol.
Press the a button to save the setting.
X
Further information on the spotlight function
of Night View Assist Plus (
func-
Settings
Settings
menu.
function.
Right-
Right-
or
Left-side traffic
Left-side
traffic.
Settings
Settings
menu.
Spot‐
Spot‐
page 219).
Y
Advertisement
Table of Contents
