Table of Contents
Advertisement
MP3 mode
To select a track by skipping to a track:
X
press the = or ; button on the
remote control.
or
Press the E or F button.
X
The skip forward function skips to the next
track.
If the elapsed track time has exceeded 8
seconds, the function skips back to the
beginning of the track.
If the elapsed track time is less than 8 sec-
onds, the function skips back to the begin-
ning of the previous track.
To select a folder: press the : button
X
on the remote control.
Highlight one of the two folder symbols
X
with the = or ; button and press 9
to confirm.
Depending on your selection, the previous
or next folder is selected and the first track
is played.
Additional setting option:
Adjusting the sound settings (
R
Video DVD mode
To hide a menu: confirm
X
button.
The video image is played in full screen
mode.
Additional setting options:
Adjusting the brightness, contrast and col-
R
our (
page 526)
Y
Changing the picture format (
R
Adjusting the sound settings (
R
AUX mode
Introduction
You can connect one external video source to
each of the displays of the Rear Seat Enter-
tainment System (AUX display) and also one
external video source to the rear-compart-
Rear Seat Entertainment System
ment drive (AUX drive) with a sound and video
signal.
Please see the corresponding operating
instructions for information on how to oper-
ate the external video source.
For further details about external video sour-
ces, please consult a Mercedes-Benz Service
Centre.
Connecting AUX equipment
AUX drive
The AUX drive jacks are located on the
CD/DVD drive on the right next to the
CD/DVD eject button (
AUX display
The AUX display jacks are on the side of the
screen (
Audio and video connection
X
X
page 525)
Y
Switching to AUX mode
Menu
Menu
with the 9
AUX drive
X
X
page 526)
Y
X
page 525)
Y
page 520).
Y
Insert the audio plugs for the left and right
signals into the corresponding L and R
jacks.
Insert the video plug into the V jack.
Select
Aux
Aux
in the menu using the
9=; buttons on the remote
control and press the 9 button to confirm.
The AUX menu appears.
Select
Source
Source
from the AUX menu and
press the 9 button to confirm.
Select
Disc drive Aux
Disc drive Aux
button to confirm.
You will hear and see the content of the
external video source if it is connected to
the CD/DVD drive and switched to play-
back. If no video image is available from the
AUX source connected, you will see an
audio menu.
page 521).
Y
and press the 9
Z
541
Advertisement
Table of Contents
