Table of Contents
Advertisement
Switching the COMAND display on/off
Press the W function button.
X
or
Select
System
System
in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
In both cases, the system menu appears.
To switch off: select
X
press W to confirm.
To switch on: press one of the function
X
buttons, e.g. W, Ø or the % back
button.
Cleaning instructions
! Do not touch the COMAND display. The
display has a very sensitive high-gloss sur-
face; there is a risk of scratching. If you
have to clean the screen, however, use a
mild cleaning agent and a soft, lint-free
cloth.
The display must be switched off and have
cooled down before you start cleaning. Clean
the display screen, when necessary, with a
commercially available microfibre cloth and
cleaning agent for TFT/LCD displays. Do not
apply pressure to the display surface when
cleaning it, as this could cause irreversible
damage. Then dry the surface with a dry
microfibre cloth.
Avoid using alcoholic thinners, petrol or abra-
sive cleaning agents. These could damage the
display surface.
Display off
Display off
and
At a glance
293
Z
Advertisement
Table of Contents
