Mercedes-Benz SL Roadster 2012 Owner's Manual page 110

Catch lever (example: driver's side)
A
Guide
B
To install: insert guides B of boot sepa-
X
rator : into the brackets.
Slide in boot separator : as far as it will go.
X
Turn driver's side catch lever A in the
X
direction of the arrow.
Repeat the same process on the catch lever
X
on the passenger side.
Boot separator : is unlocked.
Pull boot separator : by handle ? in the
X
direction of the arrow.
Hook boot separator : into fastening eye-
X
lets = in the side panels.
Pull net ; forwards and hook the left and
X
right-hand sides into the holder.
Draught stop
Manual draught stop
Important safety notes
G WARNING
If you use the draught stop in darkness or in
other conditions offering poor visibility, your
view to the rear is further impaired. There is a
risk of an accident.
Only use the draught stop when visibility con-
ditions are good.
G WARNING
If the draught stop is incorrectly fitted, it could
detach itself during a journey and endanger
other road users. There is a risk of an accident
and injury.
Fit the draught stop as described. Do not
place any objects on top of the fitted draught
stop.
! Fit or remove the draught stop only when
the roof is open. You could otherwise dam-
age the draught stop or the vehicle interior.
The draught stop offers protection from the
wind when driving with the roof down.
The draught stop can be fitted or removed
from the driver's side or passenger side. We
recommend that a second person assists you
when doing this.
Perform operations involving the draught
stop preferably on the side facing away from
traffic, after you have stopped the vehicle,
paying attention to road and traffic condi-
tions.
Fitting/removing
Rear brackets for draught stop
Bracket cover, front-passenger side
:
Bracket cover, driver's side
;
To fit: open the roof (
X
Press the mark on cover : and push in the
X
direction of the arrow.
Repeat the procedure with cover ;.
X
The rear brackets for draught stop = are
visible.
Roof
page 104).
Y
Z
107