Mercedes-Benz SL Roadster 2012 Owner's Manual page 513

Video
510
for programme transmission may appear in
front of the audio language: with audio
explanations (for the visually impaired) in
stereo or for the hearing impaired. If a symbol
does not appear, the programme is either
broadcast in mono or the transmission prop-
erties are unknown.
Subtitles: when this function is activated,
shows subtitles in the selected language for
the programme currently broadcast (if avail-
able).
In the "Tuner - Further Options" menu, con-
X
firm Language & Subtitles Language & Subtitles
W the COMAND controller (
A menu appears.
To select the language: confirm
X
Language Language by pressing W the COMAND
controller.
Select Prefer COMAND language Prefer COMAND language
X
of the available audio languages.
Switch the setting on O or off ª or select
an available audio language.
If you select one of the available audio lan-
guages, e.g. English, this setting is used for
the current program only.
To select subtitles: select
X
sliding ZVÆ or turning cVd the COMAND
controller and press W to confirm.
Select Subtitles Subtitles
X
Switch the subtitles on O or off ª.
Select Prefer COMAND language Prefer COMAND language
X
of the available languages for subtitles.
Switch the setting on O or off ª or select
an available language for subtitles.
If you select one of the available languages
for subtitles, e.g. English, this setting is
used for the current programme.
To exit the menu: select
X
W to confirm.
by pressing
page 509).
Y
Audio Audio
or one
Subtitles Subtitles
and press W to confirm.
or one
Back Back and press
Settings
In the "Tuner - Further Options" menu, con-
X
firm Settings Settings
COMAND controller (
A menu appears.
To set a country-specific character set:
X
select 1. country-specific charac‐ 1. country-specific charac‐
ter set ter set and press W to confirm.
Switch the setting on O or off ª.
Function deactivated: the character set
broadcast by the TV channels is used for
the display.
Function activated: a country-specific char-
acter set is used for the display.
To perform station list settings: select
X
by
2. Station List Settings 2. Station List Settings
ZVÆ or turning cVd the COMAND con-
troller and press W to confirm.
Select Display free-to-air TV Sta‐ Display free-to-air TV Sta‐
X
tions tions, Display free-to-air Radio Display free-to-air Radio
Stations Stations or
only only Stations Stations.
Switch the display of free-to-air TV chan-
nels or radio stations and data-only serv-
ices in the channel list on O or off ª.
To reset the settings: select
X
A prompt appears asking whether you wish
to reset.
Select Yes Yes or
X
After selecting
settings are reset to the factory settings.
cancels the procedure.
To exit the menu: select
X
press W to confirm.
by pressing W the
page 509).
Y
by sliding
Display data-service- Display data-service-
Reset. Reset
No No and press W to confirm.
Yes, the reception device Yes
0. Back 0. Back
No No
and