Mercedes-Benz SL Roadster 2012 Owner's Manual page 426

Briefly press button ; on the module.
X
Indicator lamp : flashes blue. In the
COMAND Online display, a message
appears which informs the user that the
telephone is being activated.
COMAND Online always searches for the
last connected mobile phone.
If no connection can be made to the most
recently connected mobile phone, the sys-
tem searches for the mobile phone that
was connected before that one.
Data modem mode
Connect the mobile phone to the module
X
( page 421).
Y
or
Insert the SIM card into the integrated SIM
X
card reader on the module (
Before connecting for the first time, select
X
the network provider in COMAND Online
( page 434).
Y
Use as a data modem is automatically acti-
vated.
To activate/deactivate data roaming
X
( page 424).
Y
Settings
Storing/deleting the SIM card PIN
If you store the SIM card PIN in the module, it
is not necessary to enter it when logging in
again.
To select
X
telephone menu: turn and press the con-
troller.
Select
X
You will see the Bluetooth
mobile phones that are already authorised.
Select the desired mobile phone.
X
To select the list symbol on the right-hand
X
side next to the message: slide VY and
press the controller.
Enable (PIN is saved) or disable (PIN is not
X
saved) the
Setting the ringtone
Incoming calls are indicated on the module by
an audible signal. You can select one of ten
ringtones.
To select
X
telephone menu: turn and press the con-
troller.
Select the
X
Select the desired mobile phone.
X
To select the list symbol to the right of the
X
mobile phone names: slide VY the con-
troller and press to confirm.
Select the
X
A menu appears.
Select a ringtone.
X
page 421).
Y
The selected ringtone is played.
Press the % button.
X
COMAND Online accepts the setting and
exits the menu.
Activating/deactivating phone number
transmission
Prerequisite: the module is connected with
the mobile telephone (
used in SIM card mode (
If you activate phone number transmission,
the caller you are speaking with can see your
phone number.
In the standard setting, the system accepts
the settings used by the mobile phone net-
work provider. These may vary and can be
Telephone
Connect device Connect device
SAP telephones SAP telephones.
®
Store PIN Store PIN checkbox.
Connect device Connect device
MB MB SAP SAP module module phones
Ringtones Ringtones menu.
page 421) or is being
Y
page 421).
Y
423
in the basic
names of
in the basic
phones menu.
Z