Mercedes-Benz SL Roadster 2012 Owner's Manual page 378

Select POI symbols POI symbols on on map
X
to confirm.
The following settings are possible:
Standard symbols Standard symbols
R
Symbol display determined by the factory
settings.
Personal symbols Personal symbols
R
You can determine the symbols yourself.
No symbols No symbols
R
The map does not show any symbols.
Select Standard Standard symbols symbols,
X
symbols symbols or No symbols No symbols.
If you select Personal symbols Personal
list appears.
To switch the symbol display on/off:
X
select a POI by turning cVd the COMAND
controller and press W to confirm.
Depending on the previous state of the
symbols, they will either be shown O or
hidden ª. You can switch on the icon dis-
plays for more than one POI.
To switch all personal symbols on/off:
X
select All All and press W to confirm.
Depending on the previous status of the
symbols, they will either be shown O or
hidden ª.
If the function is switched on O, the indi-
vidual POIs are greyed out and the previ-
ously selected settings remain unchanged.
If the function is switched off ª, you can
reselect the individual POIs. This displays
the previous settings.
i
The list shows all symbols that are con-
tained on the digital map across all coun-
map and press W
Personal Personal
symbols, the POI
tries. However, not all POIs are available in
all countries. As a result, certain POI sym-
bols may not be displayed on the map, even
if the symbol display is switched on.
To exit the menu: press the % back
X
button.
Selecting map information
Map information in the display
During route guidance, you can have map
information displayed at the bottom edge of
the display.
To show the menu: press W the COMAND
X
controller.
Select Navi Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Map Map settings settings
X
firm.
The map settings menu appears.
Select Text information on map Text information on map
X
press W to confirm.
A # dot indicates the current setting.
Select Current street Current street,
X
nates nates or None None and press W to confirm.
To exit the menu: slide XVY the COMAND
X
controller.
Road display
Road name or designation
:
Navigation
and press W to con-
and
Geo-coordi‐ Geo-coordi‐
Z
375