Mercedes-Benz SL Roadster 2012 Owner's Manual page 312

The front passenger sees the display of the
function last activated. If the switch-on
time was longer than 30 minutes previ-
ously, the display from the driver's side is
shown.
The front passenger can now call up the
COMAND Online functions with the remote
control.
Switching off SPLITVIEW
Select ; in the menu bar by turning cVd
X
the COMAND controller and press W to
confirm.
SPLITVIEW symbol : disappears from the
display. Display ; switches to
i
If COMAND Online has already been
switched on, you can also use the remote
control to switch SPLITVIEW on and off.
Make sure that the SPLITVIEW symbol is
set on the remote control thumbwheel
( page 520).
Y
The SPLITVIEW display remains on for approx-
imately 30 minutes after the key has been
turned to position 0 in the ignition lock. After
this time or after the key has been removed,
the settings on the front-passenger side are
saved for approximately 30 minutes longer.
After this period, reactivation on the front-
passenger side means that the settings from
the driver's side will be used.
Transferring the driver's website
To switch on SPLITVIEW: select
X
from the main function bar by turning cVd
the COMAND controller and press W to
confirm.
Select ; in the menu bar and confirm.
X
SPLITVIEW symbol : appears in the dis-
play, and display ; switches to
Select ® in the main function bar with the
X
remote control.
A menu appears with the following options:
on. on
Owner's Manual Owner's Manual
R
Enter URL Enter URL
R
Internet Favourites Internet Favourites
R
Mercedes-Benz Apps Mercedes-Benz Apps
R
Internet Radio Internet Radio
R
Mercedes Mobile website Mercedes Mobile website
R
Transfer Driver's Website Transfer Driver's Website
R
Select
X
the remote control.
You see the last website called up by the
driver.
Transferring a destination to the driver
Using SPLITVIEW you can select a destination
from the front-passenger side and transfer
this to the driver's side.
To switch on SPLITVIEW: select
X
Settings Settings
from the main function bar by turning cVd
the COMAND controller and press W to
confirm.
Select ; in the menu bar and confirm.
X
SPLITVIEW symbol : appears in the dis-
play, and display ; switches to
off. off
Select ® in the main function bar with the
X
remote control.
A menu appears.
Select
X
remote control.
You see the selection of Mercedes-Benz
Apps.
At a glance
Transfer Driver's Transfer Driver's Website
Mercedes-Benz Apps Mercedes-Benz Apps
309
Website with
System System
off. off
with the
Z