Table of Contents
Advertisement
Selecting variable SPEEDTRONIC
Cruise control lever
Check whether LIM indicator lamp : is on.
X
If it is on, variable SPEEDTRONIC is already
selected.
If it is not, press the cruise control lever in
the direction of arrow ;.
LIM indicator lamp : in the cruise control
lever lights up. Variable SPEEDTRONIC is
selected.
Storing the current speed
Cruise control lever
Briefly press the cruise control lever up :
X
or down ;.
The current speed is stored. The multifunc-
tion display shows the stored speed, such
as
Limit 100
Limit 100 km/h
km/h, for five seconds.
Vehicles with cruise control: the stored
speed is permanently displayed in the sta-
tus indicator, e.g.
LIM 100
LIM 100 km/h
Vehicles with DISTRONIC PLUS: the seg-
ments from the start of the scale up to the
stored speed light up in the speedometer.
You can use the cruise control lever to limit
the speed to any speed above 30 km/h while
the engine is running.
Storing the current speed and calling up
the last stored speed
G
If you call up the stored speed and it is lower
than the current speed, the vehicle deceler-
ates. If you do not know the stored speed, the
vehicle could decelerate unexpectedly. There
is a risk of an accident.
Pay attention to the road and traffic condi-
tions before calling up the stored speed. If you
do not know the stored speed, store the
desired speed again.
Cruise control lever
Briefly pull the cruise control lever towards
X
you :.
Setting a speed
km/h.
Cruise control lever
To adjust the set speed in 10 km/h
X
increments: briefly press the cruise con-
Driving systems
WARNING
195
Z
Advertisement
Table of Contents
