Mercedes-Benz SL Roadster 2012 Owner's Manual page 360

Destination or area of destination
reached
When you reach your destination, COMAND
Online displays a chequered flag and route
guidance is automatically ended.
If the destination is not in close proximity to a
digitised street, the Area of of destination Area
reached reached message appears when the desti-
nation is reached.
Influencing route guidance
Avoiding a section of the route blocked by
a traffic jam
Length of the blocked route section
:
Name of route section
;
Blocked route section
=
This function blocks a section of the route
ahead of you. You can set the length of the
blocked route section. If possible, COMAND
Online calculates a detour around the
blocked section of the route.
To switch to navigation mode: press the
X
Ø button.
To show the menu: press W the COMAND
X
controller.
Select Route Route in the navigation system
X
menu bar by turning cVd the COMAND
controller and press W to confirm.
Select Detour Detour and press W to confirm.
X
To block a section of the route: select
X
Longer Longer or Shorter Shorter
W to confirm until the desired section has
been selected.
destination
repeatedly and press
i
The total length of the section that can be
blocked is defined by the digital map. The
menu items are available accordingly.
To start route calculation: select
X
and press W to confirm.
To delete the blocked section: select
X
Delete Delete while the message is shown and
press W to confirm.
COMAND Online calculates the route with-
out the block.
Selecting an alternative route
With the "Alternative route" function, routes
other than the original one can be calculated.
Routes 1 to 3 are calculated with the current
settings for the route type and route options
and are shown with a dark blue line
( page 325).
Y
Route 4 is the economic route (eco route) and
is shown with a green line.
On the right-hand side, you will see informa-
tion on the currently selected alternative
route, e.g. distance, estimated remaining
driving time and estimated time of arrival.
Route sections used (e.g. motorways, tun-
nels) are displayed as symbols.
Option 1
To switch to navigation mode: press the
X
Ø button.
To show the menu: press W the COMAND
X
controller.
Select Route Route in the navigation system
X
menu bar by turning cVd the COMAND
controller and press W to confirm.
Select Alternative route Alternative route
X
to confirm.
Navigation
357
Start Start
and press W
Z