Table of Contents
Advertisement
B. HEADER ATTACHMENT – A SERIES
B
a. Remove hairpin from pin (A), and remove pin
from left and right header boots (B) on header.
IMPORTANT
To prevent damage to the lift system
when lowering header lift linkages
without a header or weight box
attached to windrower, ensure that
float engagement pin is installed in
storage location (C), and not installed
at hole location (D).
Form # 169390
UNLOADING AND ASSEMBLY
A
C
D
CAUTION
Check to be sure all bystanders have cleared
the area.
HEADER DOWN
b. Start the engine and activate header down
button on the GSL to fully retract header lift
cylinders.
E
c. Slowly drive windrower forward so that feet (E)
on windrower enter boots (B) on the header.
Continue to drive slowly forward until feet
engage the boots, and header nudges forward.
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
d. Stop engine and remove key.
24
HEADER UP
B
(continued next page)
Model Year - 2010
Advertisement
Table of Contents
