Table of Contents
Advertisement
STEP 14. PERFORM PRE-
DELIVERY CHECKS
WARNING
Stop windrower engine and remove key
before making adjustments to machine. A
child or even a pet could engage the drive.
a. Perform the final checks and adjustments as
listed on the "Pre-Delivery Checklist" (yellow
sheet
attached to back of this instruction) to
ensure the machine is field-ready. Refer to the
following pages for detailed instructions as
indicated on the checklist.
b. The completed checklist should be retained
either by the operator or the dealer.
A. SERIAL NUMBERS
a. Record serial numbers on checklist.
B. FINAL DRIVE LUBRICANT LEVEL
OIL LEVEL
b. Rotate wheel so that one of the plugs is
horizontally aligned with the center of the hub.
c. Remove the plug.
through the hole or slightly running out.
Form # 169390
PRE-DELIVERY CHECKS
The oil should be visible
C. TIRE PRESSURES
Measure tire pressure with a gauge.
Bar – 32 psi (221 kPa)
Turf – 20 psi (138 kPa)
Caster - 10 psi (69 kPa)
D. ENGINE COOLANT
d. Check the coolant level in the coolant recovery
tank. Tank should be at least half full.
e. Check coolant concentration in the radiator.
Coolant shall be good for temperatures of -30°F
(-34°C).
E. AIR CLEANER
a. Check that air cleaner cap is firmly attached and
that all clamps on air cleaner are secure.
36
Model Year - 2010
Advertisement
Table of Contents
