Table of Contents
Advertisement
F. HYDRAULIC OIL LEVEL
b. Turn filler cap counterclockwise to loosen bung,
and remove dipstick.
c. Check that level is between LOW and FULL
marks.
d. Reinstall filler cap and turn clockwise to tighten
bung.
G. FUEL SEPARATOR
a. Turn drain valve by hand 1½ to 2 turns
counterclockwise until draining occurs.
b. Drain the filter sump of water and sediment until
clear fuel is visible. Clean as necessary.
c. Turn the valve clockwise to close the drain.
Form # 169390
PRE-DELIVERY CHECKS
H. A/C COMPRESSOR BELT
a. Tension on A/C compressor belt should be such
I. FAN BELT
a. Tension on fan belt should be such that a force
37
that a force of 8 to 12 lbf (35-55 N) deflects the
belt 3/16 in. (5 mm) at mid-span.
of 22 lbf (100 N) deflects belt 5/16 to 1/2 in. (8
to 12 mm) at mid-span.
Model Year - 2010
Advertisement
Table of Contents
