STEP 6. INSTALL STEPS
a. Install two ½ in. x 1.0 hex bolts in upper holes in
platform. Do not thread in fully.
b. Hang step assembly on bolts.
c. Install two ½ in. x 1.0 hex bolts in lower holes in
step and tighten.
d. Tighten upper bolts installed in step a.
Form # 169390
UNLOADING AND ASSEMBLY
STEP 7. INSTALL CENTER LINK
MECHANICAL LINK
a. Remove clevis pin from center link.
b. Position link between mounting brackets on front
c. Install clevis pin and secure with hair pin.
HYDRAULIC LINK – OPTION
17
frame and attach at lower hole location.
The hydraulic center link is supplied in a
separate kit that is included with the shipment.
Refer to installation instructions in the kit.
Model Year - 2010