Table of Contents
Advertisement
STEP 2. REPOSITION RH LEG
(BOLTED FRAME)
For Fixed Frame windrower, proceed to STEP 3
INSTALL FRONT WHEELS.
Only
the
right
repositioning from shipping to field configuration.
a. Support the front of the windrower leg off the
ground with stand (or equivalent).
b. Position jack under RH leg and raise jack slightly
to take some weight off leg.
c. Remove two bolts, washers, and nuts from
frame.
d. Tap out the two pins with a hammer.
Form # 169390
UNLOADING AND ASSEMBLY
cab-forward
leg
requires
e. Move leg out to expose one hole.
f.
Re-install pins and secure with bolts, washers,
and nuts (not shown). Torque nuts to 100 ft·lbf
(136 N·m).
g. Lower the jack and remove it from RH leg.
12
Model Year - 2010
Advertisement
Table of Contents
