On-Board Ethernet Interface; User Interface - Serial Host - Datalogic Matrix 120 Product Reference Manual

On-Board Ethernet Interface

For Ethernet models, the on-board Ethernet Interface can be used for TCP/IP
communication with a remote or local host computer by connecting the reader to
either a LAN or directly to a host PC. There is no need to use a crossover adapter
since Matrix 120 incorporates an auto-cross function.
A CAB-ETH-M0x cable can be used to connect to a LAN.
On the Matrix 120 on-board Ethernet interface the following communication
channels are available:
• TCP Client
• TCP Server
• UDP Channel
• FTP Client
The following Fieldbus protocols are also available over the on-board Ethernet
interface:
• EtherNet/IP
• PROFINET IO
• Modbus TCP Client
For further details refer to the Help On Line page of the Reading Phase step
(Channels) and (Fieldbuses) in DL.CODE.

User Interface - Serial Host

The following table contains the pinout for standard RS232 PC Host interface.
For other user interface types please refer to their own manual.
Pin
2
3
5
Product Reference Guide
RS232 PC-side Connections
9-pin male connector
Name
RX
TX
GND
On-Board Ethernet Interface
25-pin male connector
Pin Name
3 RX
2 TX
7 GND
67